Series 200 Pigtail Cable Assembly
Our LLC200 cable is lower loss than common used 195 cable - 16.9dB/100' vs. 19dB/100' @ 2500MHz
Used for connecting Antenna to wireless AP/Bridge/Adapter
For longer cables (over 10') see our lower loss 400 series cable

These pigtail cables are manufactured using Low Loss 200 cable that provides a higher performance cable with excellent flexibility. All cables are completely assembled, tested and include a heat shrink weather tight seal on both cable connectors. Be sure to weatherproof all outdoor exposed connections.

If the distance between your antenna and the wireless AP/Bridge/Adapter is greater than 10 feet, we recommend the lower loss 400 Series Low Loss cable between the antenna and the pigtail. The 400 series cable is much larger (.405 in O.D.) and has much lower attenuation (loss).

Refer to the pictures below to verify the connector you need. If you need further assistance, please email us the model of your wireless device.

We have also listed the estimated loss (at 2.4Ghz) under the pigtail length to assist you in making decisions when using these pigtails with our 400 series cable. Remember to add the total loss for both cables.

Related items:
Low Loss Antenna Cable
Self-Amalgamating "Cold Shrink" Weatherproofing Tape

N-Male View to RP-SMA Male View
Fits: 3 COM, Belkin, D-Link, Hawking, Intel, Linksys, Netgear, Proxim, SMC, Trendnet, U.S. Robotics,  and others

N-Male View to RP-TNC Male View
Fits: Cisco, Linksys, Proxim, U.S.Robotics and others

Price: $9.95 Length: 24" .33db loss

Price: $11.50 Length: 60" .84 db loss

Price: $13.95 Length: 120" 1.6 db loss

Don't forget weatherproofing tape

---

N-Male to N-Male View
Fits: N-Female

Price: $9.95 Length: 24" .33db loss

Price: $11.50 Length: 60" .84 db loss

Price: $13.95 Length: 120" 1.6 db loss

The above cable is also available in our Low Loss 400 series

---

Custom length pigtails can be ordered using our Custom Pigtail Selector
(Custom length cables are not returnable)

Low Loss 200 cable by the foot (.45/ft) Low Loss 200 Series Cable only - does not include connectors/assembly Bulk Coax Cable is NOT RETURNABLE Equivalent to: Times Microwave LMR200 Andrew CNT-200 Commscope WBC-200 Belden RF200 16.9 dB loss/100' @ 2500 MHz This cable is not recommended for over 10' length See our 400 series cable for longer cable runs

Cable Connector Kit includes Glue Heat Shrink Tube (For Low Loss 200 type cable) 4 Piece Kit - includes: Cable connector Crimp Sleeve   Center pin/socket (crimp or solder) Glue Lined Heatshrink tube

N-Male View   N-Female View RP-SMA Male View   RP-SMA Female View RP-TNC Male View   RP-TNC Female View Select connector type: N-MaleN-FemaleRP-SMA MaleRP-SMA FemaleRP-TNC MaleRP-TNC Female Price:  $2.55 ea.